LoChlor Salt Stain Remover 1KG

For The Removal Of BROWN IRON STAINS

Anhydrous blend of Citric acid and other inert ingredients

Features & Benefits

• Removes stains caused by iron in swimming pools
• Can be used on all surfaces
• Ideal for pools where salt stains are common

Dosage and application

• 1KG treats 50,000 Litres pool water

Tips from the stain experts…

Iron and Manganese stain removal

• Remove Chlorine and ensure pH is 7.2 to 7.6.
• Add 1 Kg of Lo-Chlor Salt Stain Remover, by sprinkling around the outside of the pool.
• Filter as normal.
• The stain should be gone within twelve hours.
• If in the unlikely event this does not remove all the stain, repeat with another 1 Kg.
• When the stain is gone, add 1 Litre of Lo-Chlor Metal Solution.
• Do not Superchlorinate for 10 days after adding Metal solution, or the stain will return immediately.
• It takes about 10 days to 2 weeks for Metal Solution to get rid of a stain.
• If the stain was severe it may be necessary, after stain removal, to adjust pH to 7.8 to 8.0 and add 1 Litre Lo-Chlor Maxi Floc Plus.
• Making the pool alkaline and then floccing will remove about 70% of the dissolved metals.
• Leave overnight and then vacuum to waste.
• Balance the water and then add 1 Litre of Lo-Chlor Metal Solution.

For a salt water pool this treatment may need to be repeated every six months!