Milwaukee 48-68-0060 M18 Cut-Out Tool Collet Nut

**Milwaukee parts change not only by model# but also by serial number. Milwaukee’s site lets youlook up your tool’s parts diagram.Milwaukee M18 Cut-Out Tool Collet NutModel Number: 48-68-0060The Milwaukee 48-68-0060 is a genuine OEM Collet Nut for the Milwaukee M18 Cut-Out Tool. The collet nut is the threaded retaining nut that clamps the collet against the accessory shank generating the clamping force that locks the cutting bit or accessory to the output spindle during cut-out tool operation. Tightening the collet nut compresses the collet around the accessory shank, while loosening it releases the collet to allow bit changes. The collet nut must thread smoothly and generate consistent clamping force to ensure secure bit retention at the rotational speeds of cut-out tool operation. A stripped, damaged, or cross-threaded collet nut that can no longer generate proper collet clamping force requires replacement to restore secure accessory retention.Using a genuine Milwaukee OEM collet nut ensures the correct thread specification, wrench flat size, and clamping geometry for the M18 Cut-Out Tool collet system. Always verify your catalog number and serial number on Milwaukee’s website before ordering to confirm this is the correct collet nut for your specific unit.FeaturesGenuine Milwaukee OEM collet nut for the Milwaukee M18 Cut-Out ToolClamps the collet against the accessory shank to lock cutting bits to the spindleGenerates consistent clamping force for secure bit retention at operating speedAllows quick bit changes when loosened with the collet wrenchVerify catalog number and serial number on Milwaukee’s website before orderingSpecificationsType: Collet NutCompatible Tool: Milwaukee M18 Cut-Out ToolApplication: Collet Clamping and Accessory Shank RetentionCompatible Tool Type: Milwaukee M18 Cut-Out ToolIncludes(1) Milwaukee 48-68-0060 M18 Cut-Out Tool Collet Nut